Oriental motor BLE2D30-C User Manual

HP-5104
Brushless Motors
BLE2
Series
Operating Manual
(Basic Function)
(Excluding drivers for electromagnetic brake motor)
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
For your use, refer to the USER MANUAL downloaded from Oriental Motor Website for detailed
instructions on how to use the product.

Oriental motor BLE2D30-C Specifications

General

Brand	Oriental motor
Model	BLE2D30-C
Category	Engine
Language	English

Summary

Safety Precautions

Description of graphic symbols

Explains graphic symbols used in the manual for safety instructions.

Warning information

Information about warning labels attached to the driver.

Precautions for Use

Wirings

Guidelines for connecting wires to the product.

Operations

Precautions for operating the motor and driver.

Insulation resistance measurement and dielectric strength test

Precautions for insulation resistance and dielectric strength tests.

Handling of the driver

Installing

Installation location

Installation method

Connecting

Connecting the power supply (CN1)

Details on connecting the AC power supply to the driver.

Connecting the motor and driver

Instructions for connecting the motor and driver using cables.

Grounding

Explains the proper grounding procedures for safety and performance.

Connecting the I/O signals (CN5)

Details on connecting input and output signals via CN5.

Connecting external analog setting devices

How to connect external devices for analog setting.

Connecting the regeneration resistor

How to connect the regeneration resistor for overvoltage protection.

Connection diagram

I/O signals list

Operating Using the Operation Panel

Operating Using External Signals

Operation data

Setting of rotation speed

Procedures for setting motor rotation speed via panel or analog devices.

Setting of torque limiting

How to limit the motor's maximum output torque.

Setting of acceleration/deceleration time

Adjusting acceleration/deceleration for smooth operation.

Operation/stop

Explains how to operate and stop the motor using input signals.

Setting of rotation direction

How to set and change the motor's rotation direction.

Operation Panel

Operation panel

Names and functions of parts

Setting of operation data

Setting of parameters

Test mode

Edit lock function

Troubleshooting

Alarm

Alarm reset

Procedures for resetting alarms after resolving the cause.

Alarm lists

Lists common alarms, their causes, and remedial actions.

Specifications

Specifications

Pin assignment