Oriental motor BLE2D120-C User Manual

HP-5104
Brushless Motors
BLE2
Series
Operating Manual
(Basic Function)
(Excluding drivers for electromagnetic brake motor)
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
For your use, refer to the USER MANUAL downloaded from Oriental Motor Website for detailed
instructions on how to use the product.

Oriental motor BLE2D120-C Specifications

General

Motor Type	Brushless DC Motor
Output Power	120 W
Rated Speed	3000 rpm
Rated Torque	0.38 Nm
Speed Range	3000 rpm
Torque	0.38 Nm

Summary

Safety precautions

Handling of this product

Precautions for safe handling of the product.

Installation

Safety guidelines for the installation process.

Connection

Safety guidelines for wiring and connecting components.

Operation

Safety guidelines for operating the motor and driver.

Installing

1. Installation location

Requirements for suitable installation environments.

2. Installation method

Procedures and guidelines for installing the driver.

Connecting

1. Connecting the power supply (CN1)

Steps for correctly connecting the power supply to the driver.

2. Connecting the motor and driver

Procedure for connecting the motor to the driver.

3. Grounding

Essential grounding procedures for safety and product protection.

4. Connecting the I/O signals (CN5)

How to connect input and output signal wires.

Operating using the operation panel

4. Start of motor

5. Changing speed of motor

Operating using external signals

2. Operation data

3. Setting of rotation speed

How to set motor rotation speed via the operation panel.

4. Setting of torque limiting

Procedure for limiting the motor's output torque.

Operation panel

1. Operation panel

1-1 Names and functions of parts

Detailed identification of operation panel keys and display elements.

Parameter list

Speed, torque limiting command selection

Motor rotation direction

Speed upper limit

Speed lower limit

Maintenance and inspection

1. Inspection

Guidelines for periodic inspection of the motor and driver.

Troubleshooting

The motor does not operate.

Troubleshooting steps for when the motor fails to operate.

The rotation speed is not displayed.

Troubleshooting steps for issues with speed display.

The setting cannot be performed using the setting dial.

The motor movement is not stable.

Alarm

1. Alarm reset

3. Alarm lists