Origin Acoustics DSP3-700 User Manual

DSP3 -700 AMPLIFIER INSTALLATION USER MANUAL
8
To change a program select the page “Load Program” and press the dial. The IP
address and the name of the preset of the device will appear on the display.
Loading a DSP Preset
Turn the dial to select your desired preset to match your Origin Acoustics Speakers.
If you are not sure which preset to use, refer to the “Amplifier Preset” section of this
manual. Once you have found the desired program number it will be blinking.
Press the dial to select the desired program to load, at which time it will stop
blinking. If the number is not blinking while selecting, the display will return to the
“Load Program” menu and you will need to restart the process.

Origin Acoustics DSP3-700 Specifications

General

Brand	Origin Acoustics
Model	DSP3-700
Category	Amplifier
Language	English