DSP3 -700 AMPLIFIER INSTALLATION USER MANUAL
4
Number of Channels 3 Powered Out (L/R/S)
Dynamic Power
(6dB Crest Factor)
700 Watts / Channel
All Channels Driven into 4 ohm / 70 V
500 Watts / Channel Driven into 8 ohm x 3
Dynamic Power (Peak) 1 kW / Channel x 3
Output Circuitry
Class D - Self-Oscillating PWM Topology;
400kHz Supplied by Independent SMPS
THD @ Rated Power
4 ohm (1kHz)
0.02% (1W), 0.05% (60W),
0.08% (100W)
Dynamic Range
118dB
(A-Weighted, AES-17 Filter)
Frequency Response
20Hz - 35kHz ± 3 dB
(1W 4 - 8 ohm Load)
Power Supplies
1 Independent
Switch Mode Power Supply
Consumption / Current Draw &
Thermal Dissipation @ 230V
11.8W / 0.15A / 40BTU/h (Standby)
88W / 0.55A / 300BTU/h
(I/8 Max Power @ 4 ohm)
Protections
Over-Current, Over/Under Voltage, Output
DC and Over-Temperature
Analog Input
4 x RCA A/B Unbalanced
Max Input 12dBu
Digital Input
1 Stereo Coaxial
1 Stereo Optical
Power & Amplifier Sections
*All product specifications are subject to change. Please refer to the dealer portal for the latest information.