Origin Acoustics DSP3-700 User Manual

DSP3 -700 AMPLIFIER INSTALLATION USER MANUAL
6
About the DSP3-700
Startup
Aer the installation of the device is complete you will see the startup page on the
display. If the amplifier is in Standby mode, press and hold the Standby button for
a few seconds to exit the Standby Mode to the main page.
We have simplified set-up by limiting front panel adjustments to that of
loading internal presets and setting channel levels. All other DSP adjustments
require the use of the dedicated soware program. To download the dedicated
soware program refer to the DSP3-700 section under the electronics tab
at www.originacoustics.com
DSP3 amplifiers are highly flexible and intelligent digital audio 3 Channels Class D
power amplifiers. The DSP3-700 amplifier delivers up to a total of 2,100W@4Ω or
able to drive 70/100V constant voltage lines. All setup parameters for input/output
processes and DSP features are accessible by using the remote PC soware. Each
DSP3-700 comes preloaded with up to 64 DSP presets to optimize it for use with
all of Origin Acoustics’ speakers and subwoofers assuring peak performance.

Origin Acoustics DSP3-700 Specifications

General

Brand	Origin Acoustics
Model	DSP3-700
Category	Amplifier
Language	English