What to do if my Orion Power Systems UPS is overloaded?
If the Orion Power Systems UPS is overloaded, start by removing some of the connected devices from the UPS output. If the UPS has been repeatedly overloaded, it may be locked in Bypass mode, feeding devices directly from the mains. In this case, remove some of the connected devices from the UPS output, then shut down the UPS and restart it.
What to do if Orion Power Systems DC1000RT shows fault code 43?
If your Orion Power Systems UPS displays fault code 43, it means the UPS automatically shut down due to an overload at the output. To resolve this, remove some of the connected devices from the UPS output and then restart the UPS.
What to do if Orion Power Systems UPS shows fault code 14?
If the Orion Power Systems UPS displays fault code 14, it indicates a short circuit on the UPS output. You should check the output wiring and examine the connected devices for any short circuit issues.
Why is my Orion Power Systems DC1000RT UPS not turning on?
If the Orion Power Systems UPS shows no indication and alarm, even when the main power is normal, it could be due to a poor connection of the AC input power cord. Check if the input power cord is firmly connected to the mains. Another possibility is that the AC input is incorrectly connected to the UPS output; ensure you plug the AC input power cord into the AC input correctly.
General| Brand | Orion Power Systems |
|---|---|
| Model | DC1000RT |
| Category | UPS |
| Language | English |
Guidelines for safely transporting the UPS system to prevent damage.
Instructions for preparing the UPS environment, including acclimation and avoiding moisture.
Rules for connecting UPS to power sources and loads, avoiding overloads and ensuring safety.
Key points for operating the UPS safely, including disconnection procedures and fluid avoidance.
Procedures and warnings for maintenance, service, and handling faults, emphasizing electrical hazards.
Identification and explanation of ports and connectors on the UPS rear panel for different models.
Diagram and explanation of the internal components and functional flow of the UPS system.
Step-by-step instructions for physically installing the UPS unit, including panel removal and reconnection.
Steps for connecting external batteries, UPS input/output, and communication ports for system setup.
Detailed instructions for safely replacing the UPS internal batteries without shutting down the unit.
Instructions for assembling optional battery kits for various configurations (2, 3, 4, 6 batteries).
Explanation of the functions and operations associated with the ON/Mute, OFF/Enter, and Select buttons.
Guide to understanding the symbols, indicators, and information displayed on the UPS LCD panel.
Description of different sounds the UPS makes to indicate battery mode, low battery, overload, or faults.
A glossary of abbreviations and their meanings as displayed on the UPS LCD screen.
Covers various UPS configuration settings including voltage, frequency, ECO modes, bypass, and outlets.
Detailed explanations of various UPS operating modes, including Online, ECO, AECO, and Battery modes.
A table listing fault events, their corresponding fault codes, icons, and possible causes for diagnosis.
Information on warning indicators, their flashing icons, and associated audible alarms for system alerts.
Provides solutions for common UPS issues and symptoms, including no indication, EPO activation, and reversed conductors.
Guidelines for storing the UPS, including charging requirements and recommended storage temperatures.
Information on UPS maintenance, battery service life, and when to contact the dealer for replacements.
Detailed technical specifications for various UPS models, covering capacity, input, output, efficiency, and physical attributes.
To Next Page