Orion Power Systems DC1000RT - Page 17

15
 04: ECO enable/disable
Interface Setting
ENA: ECO mode enable
DIS: ECO mode disable(Default)
 05: AECO enable/disable
Interface Setting
ENA: Advanced ECO mode enable
DIS: Advanced ECO mode disable(Default)
 06: Bypass mode enable/disable when UPS is off
Interface Setting
ENA: Bypass mode is enabled when UPS is off
DIS: Bypass mode is disabled when UPS is off (Default)
 07: Programmable outlets enable/disable
Interface Setting
ENA: Programmable outlets enable
DIS: Programmable outlets disable(Default)
 08: Programmable outlets setting
Interface Setting
0-999: setting the backup time limits in minutes from 0-999 for
programmable outlets which connect to non-critical devices on
battery mode.