15
After-sale Services
■
Before you request inspection or repair
・
Check and take actions according to the instructions under "Troubleshooting".
・
If such actions are to no avail, or if you have questions concerning the product handling,
contact your dealer rather than attempting to fix it yourself.
■
About functionality service components:
・
Functionality service components are parts required for maintaining the product's
functionality.
・
Orion will maintain the functionality service components for this product for at least 7 years
after its production termination.
■
How to request after-sale services
・
To request inspection or repair, contact your dealer and provide the following information.
(1) Product name
(2) Model name (as stated on the identification plate)
(3) Nature of concern (in as much detail as possible)
(4) Directions to your site location
・
To place order for replacement parts, provide the following information:
(1) Product name
(2) Model name (as stated on the identification plate)
(3) Part names, part numbers and the quantity required
Specifications
Model AD-5
Operating principle Disk type
Operating
range
Allowable pressure range
(gauge)
MPa 0.29 to 0.98
Allowable ambient temperature deg.
2 to 60
(Freezing to be avoided)
Applicable medium Compressed air
Performance
Maximum discharge (drain) L
／
Hr 450 (at 0.69 MPa)
Discharge (air) L
／
min 18 (at 0.69 MPa)
Connection
diameter
Drain inlet Rc1
／
2
Drain outlet Rc1
／
2
Dimensions
Dimension (W
×
H) mm 86
×
198
Weight kg 1.2
Flow path minimal diameter mm
φ
3.5
To Next Page
Loading...
