7
Installation
Installation location
Installation location
1. Make sure that the incoming air and ambient temperatures are 60℃ or lower.
2.
Do NOT use this product at an ambient temperature of 2℃ or lower. If it is used at 2℃ or
lower, the water trapped in this product may freeze. If you have no other choice but to do so,
wrap an antifreeze band around pipes upstream and downstream of tje trap as well as
around the entire Auto Drain Trap.
●Some plastic parts are used in this product. Make sure the product is free from drainage/air
containing any of the substances listed below. In addition, the installation location must be
free (or protected) from direct sunlight.
Kind of
chemicals
Classification of
chemical agents
Main products of
chemical agents
Examples of general
applications
Inorganic
chemicals
Acids
Hydrochloric acid, sulfuric acid,
hydrofluoic acid, phosphoric
acid chromic acid, etc.
Metal pickling solution,
acidic degreasing liquid,
coating process liquid,
etc.
Organic
chemicals
Aromatic
hydrocarbon
Benzene, toluene, xylene,
ethylbenzene, styrene, etc.
Included in thinner for
paints
Alcohols
Metyl alcohol, ethyl alcohol,
cyclohexanol, and benzyl
alcohol
Used as antifreezing
agent Leak detection
liquid
Phenols
Carbolic acid, creosol,
naphthol, etc.
Antiseptic solution and
phenol resin raw
material
Ketones
Acetone, methyl ethyl ketone,
cyclohexanone, acetophenone,
etc.
Carboxylic acid
Formic acid, acetic acid, butyric
acid, acrylic acid, oxalic acid,
phthalic acid, etc.
Dye, base agent of
aluminum processing
agent coating, and leak
detection liquid
Oxyacids
Glicolic acid, lactic acid, malic
acid, and citric acid
Additives to foods etc.
Amines
Methylamine, dimethylamine,
ethylamine, aniline,
acetoanilide, etc.
Additive agent to brake
oil, antistatic agent, and
plastic dyes
To Next Page
Loading...
