11
Bad example Good example
Use of a tool
Clearance No clearance
Screen
Pipe
Main body
Daily inspection and maintenance
Monthly maintenance
●If you loosen the cap by a tool applying force to its dodecagonal portion the thread on the cap
may become damaged due to its deformation; it could not work well as a result.
Do NOT loosen the cap with such a method.
●If the cap fails to be completely screwed in, the disc cap may move up and down and the disc,
washer, packing, cap, etc. could become damaged as a result.
Completely screw in the cap with your hands to hold the disc cap in place.
●When removing the screen, pull it straight downward to remove it. if you move it from side to
side, the pipe may become damaged.
Troubleshooting
WARNING
●Remove any compressed air from inside the Auto Drain Trap before cleaning/maintenance.
If there is any residual compressed air in it, its parts may fly out, resulting in injury.
●If the problem cannot be solved by disassembly & cleaning and/or part replacement, please
contact either the dealer that you purchased this product from or a qualified service company.
To Next Page
Loading...
