15
WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
6 SPECIFICATIONS
* Range depends on location, temperature and battery conditions.
›ALARM PANEL
Power Supply DC 12V 500mA
Power Consumption 5W Max
GSM Frequency 850/900/1800/1900MHz
Radio Frequency 433MHz
Backup Battery 2 x Lithium-ion
3.7V/800mAh (Included)
Inbuilt Siren 110dB
Operating Temperature 10°C~55°C
Operating Humidity < 80% (non-condensing)
Dimensions 188(L) x 132(W) x 26(H)mm
›PIR MOTION SENSOR
Power Supply DC 3V (2 x AA Alkaline
Battery Included)
Power Consumption 0.03W Max
Detection Scope 8m/110°
Wireless Range Up to 50m*
Radio Frequency 433MHz
Operating Temperature -10°C~55°C
Operating Humidity < 80%
Dimensions Sensor: 108(L) x
52(W) x 36.8(H)mm
Bracket: 52(L) x
30(W) x 26.5(H)mm
›DOOR/WINDOW CONTACT SENSOR
Power Supply DC 1.5V (AA Alkaline
Battery Included)
Power Consumption 0.06W Max
Wireless Range Up to 50m*
Radio Frequency 433MHz
Operating Temperature 10°C~55°C
Operating Humidity < 80%
Dimensions Sensor: 71(L) x
34(W) x 17.5(H)mm
Magnet: 51(L) x
12(W) x 13.5(H)mm
7 WARNING
› Do not drop, puncture, or violently
shake the unit.
› Do not mount, directly expose or put
near to the sun, water, air conditioner,
refrigerator radio transmitting devices,
metal objects, heater, oven, any heat
sources, rapid temperature changing or
high air flow locations.
› Do not cover the unit, mount the unit on
adequate locations and heights.
› Handle the unit with care, avoid
unnecessary force or impact.
› This unit is for indoor use only.
8 ALARM MONITORING SERVICE
For added security, use this alarm system in
conjunction with alarm monitoring service for
rapid response to an emergency.
Contact your local alarm monitoring service
provider to establish a response plan.