Do you have a question about the Orion COBALT CO 230 and is the answer not in the manual?
Channels | 2 |
---|---|
RMS Power at 4 Ohms | 115W x 2 |
Minimum Impedance Unbridged | 2 Ohms |
Minimum Impedance Bridged | 4 Ohms |
Frequency Response | 20Hz - 20kHz |
Bass Boost | 0 to +18 dB |
Signal-to-Noise Ratio | >90dB |
THD | <0.1% |
Advises on proper mounting locations and handling to prevent heat damage or injury.
Details the physical steps and cautions for mounting the amplifier.
Covers wiring precautions and best practices for connecting the amplifier.