22
Operating and Riding the Electric Balancer
WARNING: DO NOT PRY THE COVER FROM THE SIDES OR THE
REAR, THERE ARE LOCKING TABS ON THE REAR OF THE COVER AND YOU
WILL BREAK THEM OFF. PLEASE READ THESE INSTRUCTIONS CAREFULLY.
Please pay attention when you remove the cover. The speed
switch is connected to the cover. Once you pry the cover off
you can unplug it.
The cover opens from the front (round part) and will require you to pry it
open as shown in the pic below. A screwdriver or anything flat will work.
STOP!!!! After you remove the cover take a picture of
the wires and how they are arranged.
To Next Page
Loading...