23
Operating and Riding the Electric Balancer
To locate the wires, we wrapped the wires with a white tube and zip-tied
the group together. The words ‘Zero Start Switch”-KSM, and “Speed Limit
” 50%-100% power are on each set of the wires. See pic above.
- 50-100% power mode: Locate the solid BLACK AND WHITE wires with
a black connector and white tube that says “power limit switch” and
unplug it. This will give you 100% power.
- KSM mode: Locate the solid BLACK AND LIGHT BLUE wires with the
red connector and unplug it. This will change the Balance Bike to
NON-Kick mode (12in only). 16in has this function however we do not
connect it. If you want this function on your 16in bike then connect
the red connector together.
To Next Page
Loading...