24 PtZ control - Patrol
Patrol function enables DVR to move the PTZ camera according
to a list of multiple presets sequentially and continuously.
CREATING PATROL
a In PTZ Control menu, select Set to bring up PTZ Config
menu and select Tour function. Note that presets need to be
created before including them into patrol list.
b Select a number for the patrol list in Patrol No. box.
c Enter Preset to be added to the patrol list.
d Define the Interval duration for preset. This determines the
duration the camera dwells in current preset position before
moving to the next preset on the patrol list.
e Select Add Preset to confirm adding preset to the patrol list.
f Repeat steps c to d to add more presets into patrol list.
g To delete preset from patrol list, select a preset and select
Del Preset.
DELETING PATROL
a In PTZ Config menu, select Tour function.
b Select the patrol number to delete in Patrol No. box
c Select Del Tour to delete selected preset.
25 PtZ control - Pattern
Pattern function enables DVR to move the PTZ camera
according to user defined pattern.
CREATING PATTERN
a In PTZ Control menu, select Set to bring up PTZ Config
menu and select Pattern function.
c Select a number for the Pattern.
d Select Begin to start creating pattern.
e Create pattern by moving camera using directional arrows
or adjust the focus, zoom and iris. The DVR records the
movement and adjustment and assigns it to the pattern
number.
f In PTZ Control menu, select Set to bring up PTZ Config
menu and select Pattern function.
g Complete pattern setup by, selecting End.
26 PtZ control - Border
Border function enables DVR to move the PTZ camera between
two border positions continuously.
CREATING BORDER
a Using the directional arrow, move the camera to a
desired left border position.
b In PTZ Control menu, select Set to bring up PTZ Config
menu and select Border function.
c Select Left to assign current camera position to the left
border position.
e Using the directional arrow, move the camera to a desired
right border position.
f In PTZ Control menu, select Set to bring up PTZ Config
menu and select Border function.
g Select Right to assign current camera position to right
border position.
To Next Page
Loading...
