50 cms disPlay
Display menu allows the configuration of different live monitoring
view modes.
CONFIGURING SCREEN DISPLAY MODE
a Select
Display on the top toolbar.
b Select the preferred view mode.
c Select Full screen to enlarge main monitoring display to full
screen. Press Esc button to exit full screen mode.
51 cms monitor
Monitor menu allows the creation of surveillance plans for every
DVR and its channels. Monitor Task defines what DVR channels
to be displayed on the Monitoring Display. Monitor Project
defines when the monitoring tasks are enabled.
CREATING MONITORING TASK
a Select
Monitor on the top toolbar.
b Select Config to bring up the following menu.
c Select New to create new monitoring task.
d Enter a suitable name for the monitoring task, select the
number of windows to be displayed and select the video
stream type.
e Drag and drop channel from Device List to the monitoring task
table to include channel in the monitoring task. The channels
will be automatically assigned to the windows.
f Select created window to configure window in more detail.
Drag and drop more channels to the window table to enable
window to continuously switch from one channel to another
according to the list.
StayTime determines the duration the channel is displayed on
the window before switching to the next channel.
f Select OK to confirm creation of monitoring task.
DRAG
AND
DROP
DRAG
AND
DROP
To Next Page
Loading...
