48 cms cHannel control
Channel control allows the control of channel video and audio
monitoring as well as adjustment of channel colour settings.
Select a channel and open Channel Control Tab.
› RECORD: Commence recording channel on PC storage
device. The directory is determined in Local Settings. Refer
to 53 CMS System > Local Settings for details.
› CAPTURE: Take photo snapshot of channel and store on PC
storage device. The directory is determined in Local Settings.
Refer to 53 CMS System > Local Settings for details.
› TALK: Commence sending audio communication from
PC to DVR.
› LISTEN: Commence audio listening from DVR channel.
This corresponds to the audio input on the rear panel of DVR.
› VOLUME: Audio listening volume adjustment.
› BRIGHTNESS: Channel brightness adjustment.
› CONTRAST: Channel contrast adjustment.
› SATURATION: Channel saturation adjustment.
› HUE: Channel hue adjustment.
49 cms PtZ control
PTZ control allows the control of PTZ devices connected to
the DVR.
› DIRECTIONAL ARROWS: Control of the PTZ camera in 8
different directions.
› SPEED: Movement speed of PTZ camera.
› ZOOM: Select +/- button to adjust PTZ camera zoom.
› FOCUS: Select +/- button to adjust PTZ camera focus.
› IRIS: Select +/- button to adjust PTZ camera aperture.
› PRESET: Preset number assigned to camera position. Refer
to 23 PTZ Control-Preset > Creating Preset for details.
> MOVETO: Select preset number and select MoveTo to
move PTZ camera to preset position.
> SET: Store current PTZ camera position to preset number.
› PATROL: Patrol number assigned to list of presets. Refer to
24 PTZ Control-Patrol > Creating Patrol for details.
> START: Select patrol number and select Start to
commence PTZ camera patrol sequence.
> SET: Configure patrol sequence.
› SCAN: Refer to 26 PTZ Control-Border > Creating Border
for details.
> FUNC SET: Configure Auto Scan settings.
> SCAN: Enter number in box and select Scan to
commence camera border scanning movement.
› PATTERN: Enter pattern number and select Pattern to
commence camera pattern movement. Refer to 25 PTZ
Control-Pattern > Creating Pattern for details.
› AUXILIARY: Enter required auxiliary function number and
select AuxOpen or AuxClose to enable or disable function.
Refer to PTZ Control for details.
To Next Page
Loading...
