54 cms system > alarm setting
Alarm Setting allows the configuration of alarm triggered
recording and notification. Access Alarm Setting by clicking on
System and selecting Alarm Setting.
› ALARM TYPE: Type of alarm trigger.
> SENSOR: Alarm triggered by DVR wired sensor input. Not
applicable for this model.
> MOTION: Alarm triggered by detection of motion.
> VIDEO LOSS: Alarm triggered by detection of video
signal loss.
> SHELTER: Alarm triggered by detection of camera view
being obscured.
> DISK ERROR: Alarm triggered by detection of error when
reading or writing to hard drive.
> DISK FULL: Alarm triggered by detection of insufficient
hard drive space.
> DISCONNECT: Alarm triggered by detection of DVR
disconnection.
› ALARM ENABLE: Enable or disable alarm.
› ALARM PROMPT SOUND: Enable or disable sound output
when alarm triggered.
› SOUND PATH: Sound file to play when alarm triggered.
› AUTO WATCH WARN: Automatically display video channel
on monitoring screen when alarm triggered.
› LINK: Link video channel to Motion alarm or Sensor alarm.
Select Alarm Port and corresponding Video Channel then
select Add to link them.
55 cms maP control
Map control allows camera location to be associated with the
premises layout plan. Select Map Control to access map
control menu.
CREATING A MAP
a Select Edit to enable editing of map.
b Select Picture Edit to open Background Picture Manager.
c Select Add and Browse for picture of premises layout plan.
Enter a suitable name and description of the picture.
› IGNORED TIME: Multiple consecutive alarm trigger within
this duration will be disregarded.
› LINK CAPTURE: Snapshot of channel stored on local PC
when alarm triggered.
› CAPTURE DELAY TIME: Duration between alarm trigger
and snapshot taken.
To Next Page
Loading...
