c Enter the DVR information in the form.
> DEVICE NAME: Enter suitable DVR name
> DEVICE FAC: Select TS.
> TYPE: Select DVR.
> IP ADDRESS: Enter DVR IP address or domain name.
For local access, refer to DVR Main Menu > System >
Network to acquire local IP address.
For remote access, refer to DVR Main Menu > System > Net
Service > DDNS to acquire domain name.
> PORT NUMBER: Enter DVR media port. Default is 34567.
Refer to DVR Main Menu > System > Network to acquire
port number.
> USER NAME: Enter DVR account name.
> PASSWORD: Enter DVR account password.
d Select OK to complete form and exit to main interface. The
newly added device will appear on the Device List.
e Double click on the new device to connect to DVR and
expand the list of cameras.
f Double click any of the camera channels to start live
monitoring.
AUTOSEARCH DVR
a DVR and PC must be connected to the same router/modem
when using Autosearch function.
b Select Add under Device List tab and select Add Device.
c Select Auto Search to bring up the following menu.
d Auto search will automatically search for DVR in same
network. Select DVR and press Add to add DVR to include it
into Device List. Select Refresh to search for connected DVR.
e Select DVR in Device Management menu and select Edit.
To Next Page
Loading...
