Orion SMART PAN - Pairing Your Device: Initial Steps; Power On and Status Check; Initiate Pairing in App

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN004891
7.0 PAIRING YOUR DEVICE
Power on your smart camera by using the
supplied adaptor and USB cable.
It should take approximately 10 seconds
to startup and will indicate as such with a
solid red light.
You will hear a welcome sound. Confirm
the status light is red and rapidly blinking
(approximately 2 times per second). The
camera is now ready for pairing.
Once your camera is in pairing mode, open
the GRID CONNECT App, Tap , then select
security in add device page.
Confirm the status light is red and rapidly blinking
(approximately 2 times per second) before
tapping ready to pair to proceed.
step 1
Power on your device.
step 2
Hold the reset button on your device for
5 seconds for the camera to start the
reset process.
3 times
every
second
press for
5 second
ready to pair
12:30
pairing instructions
step 3
the indicator light will flash rapidly or a
tone will sound every 15 seconds when
the camera is ready to be connected
step 1
Power on your device.
step 2
Hold the reset button on your device for
5 seconds for the camera to start the
reset process.
3 times
every
second
press for
5 second
ready to pair
12:30
pairing instructions
step 3
the indicator light will flash rapidly or a
tone will sound every 15 seconds when
the camera is ready to be connected
step 1
Power on your device.
step 2
Hold the reset button on your device for
5 seconds for the camera to start the
reset process.
3 times
every
second
press for
5 second
ready to pair
12:30
pairing instructions
step 3
the indicator light will flash rapidly or a
tone will sound every 15 seconds when
the camera is ready to be connected
1110