Orion TELETEXT 14LD - Automatic Tuning; Presetting the Channels

12
PICTURE
NICAM AUTO OFF
AUDIO
LANGUAGE
AV COLOUR AUTO
LANGUAGE
ON/OFF TIMER
MENU
PRESS:
▲
/
▼
/ ENTER / MENU
CH TUNING
AUTOMATIC TUNING
PRESETTING THE CHANNELS
- Automatic tuning The stations will be preset in the order
that they appear when the automatic
tuning is activated.
- Manual tuning In this mode the TV searches until a
picture appears. If it is a station that you
want to keep, you can choose which
channel preset you want to store it on.
You repeat this procedure for each station
until you have stored all the desired
stations.
1
Press MENU.
Press or to select the
CH TUNING mode, then press
ENTER.
Once you have connected up this unit,
you will need to tune in the channels in
order to watch TV stations. There are two
ways that you can do this:
Press or to select the
AUTO mode, then press ENTER.
2
All available channels in your area
are automatically scanned and
stored in the memory of the unit.
When the set has finished
scanning, the screen shown in
step 2 appears.
3
Press MENU twice.
The unit will return to normal TV screen.
4
CH TUNING
PRESS:
▲
/
▼
/ ENTER / MENU
MANUAL
CH ALLOCATION
AUTO
CH 10
PAL
NOTES:
• If you want to skip any channels, refer to
page 16.
• When the unit is in the AV mode, you
can’t preset the channels.
CH position
Searching direction
Tuning segment bar
The automatic tuning will not necessarily store the channels
in the correct order. If you want to change the order of the
stored channels, please see page 14.
5