16
CONVENIENT FUNCTIONS
The following functions are available
from the remote control handset only.
TV/AV Selection
For receiving the desired signal:
Press AV to select the TV or AV mode.
)8ī
+0 #
TV position - to view a
normal TV programme.
AV position - to receive
through the direct Video in-
put. AV1 (from 21 pin SCART
socket on the rear), AV2 (from
Audio/Video in sockets on the
rear) or AV3 (from Audio/
Video in sockets on the left
side) indicator appears on the
screen in AV mode.
This button allows you to go back to the previous channel
by pressing QUICK VIEW. Press this button again to return
to the channel you were watching.
QUICK VIEW
DISPLAY
When you press this button once, the channel number will
appear. Press this button again, then the display will disappear.
MUTE
When MUTE is pressed, the TV sound will be turned off
completely. To disable this function, press the button
again or VOL + or ā.
After all channels available in your area have been set in
memory, you can skip unwanted channels as follows.
SKIP FUNCTION
SLEEP
To set the unit to turn off, press SLEEP on the remote
control. The clock will count down 10 minutes each time the
button is pressed in the order of 120, 110, 100,...20, 10, 0.
After the sleep time is programmed, the display will disap-
pear and will reappear momentarily every 10 minutes. To
confirm the sleep time setting, press SLEEP once and the
remaining time will be momentarily displayed.
To cancel the sleep time, press SLEEP repeatedly until the
display turns to 0.
1
Press CH
MM
MM
M or
??
??
? to select the channel which you want
to skip.
NOTE:
To cancel the SKIP function, press DIRECT CHANNEL
SELECTION (numeric buttons) to select the channel which
you want to cancel, then press CANCEL again.
2
Press CANCEL.
When a channel is skipped, the channel number will
blink.
3
Skip all unwanted channels the same way following
steps 1-2.
FREEZE
This function allows you to make a freeze frame of your
favorite picture onto the TV-screen. If you find the favorite
picture during TV-reception or connected DVD-, VCR- or
CAMCORDER-playback, press FREEZE.
To cancel freeze, press FREEZE again.
To Next Page
Loading...
