18
PICTURE ADJUSTMENTS
1
Press MENU.
PICTURE
NICAM AUTO OFF
AUDIO
LANGUAGE
AV COLOUR AUTO
LANGUAGE
ON/OFF TIMER
MENU
PRESS:
▲
/
▼
/
ENTER
/
MENU
CH TUNING
The picture settings have been
adjusted at the factory under optimum
signal reception conditions. However,
you can adjust for BRIGHTNESS,
CONTRAST, COLOUR and SHARP-
NESS to your preference.
Press
or to select the
PICTURE mode, then press
ENTER.
2
BRIGHTNESS CONTRAST COLOUR
NOTE:
Each time
is pressed, the on screen display will
change as shown below.
To adjust the BRIGHTNESS,
press
or , then press .
(TINT)
Press MENU twice to return to normal TV screen.
SHARPNESS
3
BRIGHTNESS 0
PRESS:
B
/
A
/
C
/
D
/MENU
NOTES:
• The picture settings can only be adjusted
when they are displayed on screen.
• Pressing CANCEL will return all
adjustments to their factory preadjusted
levels. This function is available in
adjusting picture mode.
• TINT will appear only when the NTSC
Colour System is selected.
To Next Page
Loading...
