47
BEFORE REQUESTING SERVICE
If your unit does not work properly check the following before calling a service engineer.
7
11
CAUSE
SYMPTOMS SOLUTION
PAGE
POWER
No power.
The Mains lead is not connected.
POWER button is OFF.
11
7
8
No picture, no sound.
TV BROADCAST RECEPTION
Sound OK, poor picture.
Picture OK, poor sound.
Poor reception.
Poor colour or no colour.
DVD
The Mains lead is disconnected.
Antenna connector is not connected or wires
are broken.
POWER button is off.
Possibly station trouble.
Possibly station trouble.
Possibly local interference.
Possibly station trouble.
Possibly local interference.
Volume control set at minimum position.
Antenna connector is not connected or wires
are broken.
Possibly station trouble.
Possibly station trouble.
Possibly local interference.
Antenna connector is not connected or wires
are broken.
Colour control is not adjusted.
Antenna connector is not connected or
wires are broken.
Connect Mains lead to AC socket.
Set it to ON.
Connect the Mains lead to the AC socket.
Check antenna connections or broken wires.
Press the POWER button.
Try another channel.
Try another channel.
Check antenna connections or broken wires.
Move the antenna away from the source of
interference.
Try another channel.
Move the antenna away from the source of
interference.
Increase VOLUME control.
Check antenna connections or broken wires.
Try another channel.
Check antenna connections or broken wires.
Try another channel.
Move the antenna away from the source of
interference.
Adjust the colour settings.
18
21
15
8
15
8
15
21
15
21
8
15
15
24
Eject the disc and clean it.
The disc is dirty.
–
Some times a small amount of picture
distortion may appear. This is not a malfunction.
It is in fast forward or fast reverse playback.
The playback picture has
occasional distortion.
REMOTE CONTROL
6
Aim it at the remote control sensor.
It is not aimed at the remote sensor.
6
6
6
Operate within 5 metres and reduce the
light of the room.
Clear the path of the beam.
Replace batteries.
Batteries are weak.
Obstacle in the path of beam.
Distance too far or there is too much light in
the room.
Remote control does not
work.
24
27
Insert a disc.
Insert a playable disc (Check the disc type
and colour system).
An unplayable disc is inserted.
No disc is inserted.
The unit does not start
playback.
Clean the disc.
The disc is dirty.
Cancel the parental lock function or change
the parental lock level.
The parental lock function is set.
Playback does not follow the
course of the disc’s program.
These operations may prevent a proper
progress of the contents.
It is in the mode of repeat playback,
memory playback, etc.
The function is prohibited with the unit or the disc.
– appears on the screen.
40,41
24
–
–
6
Install batteries correctly.
Polarities of the batteries, + or –, are not
inserted correctly.
To Next Page
Loading...
