15
TV OPERATIONS
1
Press Power on the top of the unit or remote control to
turn on the unit. The standby indicator will go off.
Press TV/DVD to select TV mode.
Once you have correctly connected
and set up the channels on your set,
you can view the channels as
follows.
2
Direct Channel Selection buttons (0-9)
Press the Direct Channel Selection buttons on the remote
control.
1-9 CH: Press your required number only.
10-110 CH: Press the two or three digits in accordance to
the channel numbers required.
VOLUME 32
+0 '
CH
MM
MM
M /
??
??
?
Press CH
MM
MM
M or
??
??
? on the remote
control.
3
The VOLUME can be adjusted
by pressing the VOL + or – on the
remote control.
NOTE:
The on screen display will disappear after
4 seconds.
Automatic Power Shut Off
If a station being viewed stops broadcasting
for about 15 minutes, the unit will
automatically shut itself off and go into
standby mode.
To Next Page
Loading...
