4
Depending on the DVD, the start-up sequence will vary. Some DVDs indicate a
menu screen. Press
/ or / to select the menu. Then press ENTER
to confirm the selection.
Setting Setup language for DVD
J5N70307A
K
Press SETUP until normal
TV screen appears.
4
Playback
1
2
3
4
Press TV/DVD to select DVD mode.
Place the disc in the disc slot with the label
side facing forward. (If the disc has a label.)
Hold the disc without touching either of its
surfaces, align it with the guides, and place it
in position.
The menu of DVD will be read automatically. It takes a few seconds.
Press SETUP in the stop mode. Press
to select
“Other”, then press to select “OSD Language”,
then press or ENTER.
Press TV/DVD to select DVD mode.
1
2
Press or to select desired language,
then press ENTER.
3
Press STOP to end playback - the unit will remember this point on the disc if
you resume playback. However if you press stop again, the unit will clear the
stopped point.
5
OSD Language English English
Francais
Espanol
Deutsch
Italiano
/Enter/Setup/Return
Language Picture Parental OtherSound
OSD Language English
/Enter/Setup/Return
Language Picture Parental OtherSound
To Previous Page
Loading...
