9. Bass (front) - sets the bass boost of the high-pass crossover to 0, or 8dB of boost.
10. Bass (rear) - sets the bass boost of the high-pass crossover to 0, or 8dB of boost.
11. Crossover Switch (rear) - activates low pass crossover, full (all pass), or high pass
crossover.
12. Speaker Connections - accepts two speakers pairs for front and rear or a bridge
connection front and rear.
13. 2 ATC Fuses (25 amp) - protects the amplifier from over current situations.
14. Power Connections - accepts up to 8 AWG power and ground cables, and also
has a REM amplifier turn-on terminal (turns on the amplifier when fed +12 V).
6
© 2005 Directed Electronics—all rights reserved
To Next Page
Loading...
