Need help?Do you have a question about the Orion WCC 1600.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power Output (RMS) | 1600W |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >90dB |
| THD at Rated RMS Power | <0.1% |
| Fuse Rating | 40A x 2 |
| Impedance | 2-4 Ohms |
| Signal to Noise Ratio | >90dB |
| Dimensions | 13.5" x 2.25" x 9.25" |
| RMS Power @ 2 Ohms | 200W x 4 |
| RMS Power @ 4 Ohms Bridged | 400W x 2 |
| Crossover Frequency | 50Hz - 500Hz |
| Bass Boost | 0 - 12dB |
Details technical specifications of the amplifier, including power output, distortion, and frequency response.
Outlines the requirements and best practices for connecting the amplifier's power supply.
Steps to verify the amplifier's operation and wiring after installation.
Guide to setting amplifier gain and crossover levels for optimal audio performance.
To Next Page
