Orion WCC 1600.4 - CEA SPECIFICATIONS; Amplifier Specifications

CEA SPECIFICATIONS
SPECIFICATIONS
1. All channels driven, continuous 4W load 20Hz to 20kHz, < 0.05% THD, with input voltage
at 13.8 VDC.
2. All channels driven, continuous 2W load 20Hz to 20kHz, < 0.1% THD, with input voltage at
13.8 VDC.
Amplifier Section WCC-1600.4
Power Output 4W Stereo (Watts) 100 x 4
Power Output 2W Stereo (Watts) 200 x 4
Power Output 4W Mono (Watts) 400 x 2
Remote Gain Capable Yes
Distortion - with all channels driven < 0.1% THD+N
at rated power (20Hz to 20kHz)
Frequency Response 20Hz to 20kHz ±0.25dB
Linear Bandwidth 10Hz to 50kHz ±3dB
Signal-to-Noise Ratio at Rated Power > 100dB
Damping Factor > 200
Slew Rate > 20V per msec
RCA Input Sensitivity 200mV to 5V
Input Impedance 20kW
Fuse Type (1) 100 Amp MAXI
Dimensions 23.9" x 10.5" x 2.4"
Weight 10 lbs.
Crossover Section
Low Pass Crossover 2nd Order
(12dB per octave)
Low Pass Frequency Range 20Hz to 3kHz
High Pass Crossover 2nd Order
(12dB per octave)
High Pass Frequency Range 20Hz to 3kHz
INTELLi Bass 16dB boost
4
©2004 Directed Electronics, Inc.
WCC-1600.4
Power Output: 135 Watts RMS x 4 at 4 ohms and <
1% THD+N
Signal to Noise Ratio: -85 dBA (reference 1 Watt into 4 ohms)
Addition Power: 220 Watts RMS x 4 at 2 ohms and <
1% THD+N