Orion Xtreme Series - System #5 Audiophile Bi-amplified; System #6 Multiple Amps for Woofers

ratio,
AMPPFIER
itlilli;
CROSSOVER
CONFIGURATION
SOHte
I'iMB LOW PAS.
AMPURER
A^PUFIER
120 Hz
12 dB HIGH-j
SYSTEM #5
Audiophile Bi-amplified system. This system bypasses the gain
stage of the high frequency amplifier for a better signal to noise
ratio.
SYSTEM #6
Multiple amp system for woofers with one amplifier as the master
and two slave amplifiers. The master amplifier controls the gain for
the slave amps.
I1II ■ B'^RANGE
liOVIPUFIER
• The lowest recommended impedance 4^2 bridged mono.
• All amplifiers are operating in a summed bridged mono
configuration.
• Slave amplifiers have both module slots and gain controls bypassed
for easy system tuning and improved signal to noise ratio.
• The lowest recommended impedance 2Q per channel stereo.
• The lowest recommended impedance 4^2 bridged mono.
• Master amplifier is configured for summed bridged mono
operation.
• Slave amplifier is configured for high-pass stereo operation.
• Slave amplifier gain is bypassed for improved signal to noise