EasyManua.ls Logo

Ormazabal cgm.3 system Series - Operating Conditions

Ormazabal cgm.3 system Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General description
General Instructions
IG-136-EN version 10; 23/06/2016
13
cgm.3 system
Fully SF6 gas insulated medium voltage switchgear up to 40.5 kV in accordance with IEC Standards
1.6 Operating conditions
Installation Indoor
Maximum ambient temperature + 40 ºC
Minimum ambient temperature – 5 ºC / - 30 ºC
(a)
Maximum mean ambient temperature, measured over a 24-hour period + 35 ºC
Maximum mean relative humidity, measured over a 24-hour period < 95%
Maximum mean relative humidity, measured over a 1-month period < 90%
Maximum mean vapour pressure, measured over a 24-hour period 2.2 kPa
Maximum mean vapour pressure, measured over a 1-month period 1.8 kPa
Maximum height above sea level 2000 m
Solar radiation Negligible
Ambient air pollution (dust, smoke, corrosive and/or flammable gases, vapours or
salt)
Insignificant
(b)
Vibrations caused by causes external to the switchgear or by seismic movements
Insignificant
(a)
1000 m for metering function and non-shielded connectors. For higher installation altitudes, check with Ormazabal.
(b)
Unless indicated otherwise, It is assumed that there are no specific user requirements.
The specications refer to the section "Normal
service conditions for indoor cubicles" in
Standard IEC 62271-1 "Common specications
for high-voltage cubicles".
For special service conditions: ambient
temperature above + 40 ºC, installation over
2000 m above sea level, signicant pollution
level, or others different to those described,
check with Ormazabal.

Table of Contents

Related product manuals