Handling and transport
General instructions
IG-136-EN version 10; 23/06/2016
15
cgm.3 system
Fully SF6 gas insulated medium voltage switchgear up to 40.5 kV in accordance with IEC Standards
Figure 2.3 Lifting a cgm.3 assembly with 5 functional units.
Figure 2.4 Lifting a cgm.3 assembly with a forklift truck.
The use of lifting beams is required for cubicle
assemblies with control boxes. As the sole
exception, slings may be used if the cubicles
of the assembly have identical height control
boxes installed.
To Next Page
Loading...
