Page 71 of 77
1.2 CLEANING
THE WHEELS
Clean the wheels at least once a month keeping them free from waste (thread, hair etc...)
which can stick to them
If you verify an INEFFICIENCY, even if just partial, of the BRAKES,
contact the Dealer who sold you the product immediately. He will
evaluate their possible reparation/change in order to avoid
dangerous situations that could cause accidents.
Do NOT perform maintenance or replace parts or components
when the user is in the device.
Intensify all checks in marine environments, clean more often,
anoint the parts exposed to salt corrosion (such as chrome, bolts
and screws).
Maintenance and replacement of parts or components must never be done
while the aid is being used.
‡�ʬ��� �� �
2. PREVENTIVE MAINTENANCE (biennial)
�������ƽ � �� �� ��� ƽ � �� ��� ��
The Manufacturer recommends a COMPLETE REVIEW of the device, in order to verify it
according to the specific use and to maintain the initial performances for all its lifetime.
This activity can be carried out by the Dealer who supplied the product or by an SERVICE
CENTER , specialized in the maintenance of mechanical aids for people with disabilities and
includes:
1) The general verification of the product, the integrity of the components and the
locking of the mechanical parts, the smoothness of the moving parts
2) Performance verifications
3) The possible interventions aimed to restore the correct functionality
4) Mechanical control (in case of mechanical repairs)
5) Sanitization
Always ask for a REPORT that provides evidence of the interventions PERFORMED
(VERIFICATIONS, REPAIRS, CONTROLS, SANITIZATIONS)
Adjustable
braking rope
To Next Page
Loading...
