Page 72 of 77
3. EXTRAORDINARY MAINTENANCE (or corrective)
EXTRAORDINARY MAINTENANCE are all operations done on the device other than regular or
preventive maintenance (mentioned above).
Extraordinary maintenance must be carried out by the Dealer who supplied the product or by
another subject indicated by the Manufacturer or the Distributor of the ORMESA products in
the country of destination.
The interventions must be performed with ORIGINAL REPLACEMENTS PARTS of the
manufacturer
Modifications of the product ARE NOT ALLOWED, except for those of possible
configurations provided on the brochure
For each maintenance work, the following must be performed:
1. The general verification of the product, the integrity of the components and the locking of
the mechanical parts, the smoothness of the moving parts
2. Performance verifications
3. Mechanical control (in case of mechanical repairs)
4. Sanitization
Always ask for a REPORT that provides evidence of the the interventions PERFORMED
(VERIFICATIONS, REPAIRS, CONTROLS, SANITIZATIONS)
To Next Page
Loading...
