Need help?Do you have a question about the Orolia GSG-8 Series and is the answer not in the manual?
Guidelines for safe installation, including handling, placement, and environment.
Explains the primary application and capabilities of the GSG-8.
Outlines voltage, frequency, and power consumption details.
Specifies acceptable temperature, humidity, and altitude ranges.
Details the physical size, dimensions, and weight of the unit.
Enlists compliance standards and certifications for safety and emissions.
Describes ports and connectors located on the rear panel of the GSG-8.
Details ports and connectors accessible on the front panel.
Specific RF connection setup for the GSG-811 model.
Instructions on how to safely power on the GSG-8 unit.
Details the process of verifying and applying the GSG-8 software license.
Steps to launch SKYDEL and begin creating a new simulation configuration.
Instructions on how to add a radio device within the SKYDEL software.
Guides the selection of specific GNSS signals for simulation.
How to configure vehicle movement parameters for simulation.
Instructions on how to initiate the GNSS simulation.
Explains the process and frequency for recalibrating the GSG-8.
Steps for cleaning the GSG-8's internal filters.
Guidance on how to check for and install software updates.
To Next Page
General