INSTALLATION MANUAL OPERATION MANUAL
KANNAD 406 AS
PAGE 204
JUN 29/2022
© 2022 Orolia S.A.S. All rights are strictly reserved.
B. Installation with mounting bracket
(1) Brackets models
The mounting brackets are rectangular bases matching the exact shape of
the ELT. They are fitted with a hook and loop fastener strap used to restrain
the ELT during accident impact and with a locking pin to avoid accidentally
switching the ELT in OFF position when installed in the mounting bracket
Two models of mounting brackets may be used:
- Mounting Bracket, AS, P/N S1820511-02; this mounting bracket is fitted
with a foam used to store a dongle.
Figure 203: Mounting Bracket, AS, P/N S1820511-02
- Mounting Bracket, AS-PLUS, P/N S1820511-05; this mounting bracket
is not fitted with a foam; no dongle can be stored. The hook and loop
fastener strap is fitted with two snaps to secure the fastening of the
strap.
Figure 204: Mounting Bracket, AS-PLUS, P/N S1820511-05
To Next Page
Loading...
