EN
47
1. Unscrew the cartridge from the AVABAG system(P).
If the cartridges are still full, store them with
the protective cap screwed on in their original
packaging in a safe place, out of the reach of
children, at room temperature (approx.°C).
2. Remove the activation handle (T) from the activation
cable with silver ball (O) (see page ).
3. Open the AVABAG compartment (Z2) completely by
pulling on and opening the yellow burst zipper (A).
4. Remove the three T hooks (F) from the three
AVABAG eyelets (S).
5. Open the orange AVABAG hook and loop fastener (I)
and the orange AVABAG clip fastening (H) that are
used to mount the AVABAG system (P).
6. Remove the AVABAG system (P) and store it,
safely packed, in a dry place at room temperature
(approx.°C). For this, the AVABAG balloon (N)
should only be loosely folded.
REMOVING THE AVABAG SYSTEM
To Next Page
Loading...
Need help?
General
