54
MAINTENANCE AFTER AVALANCHE DEPLOYMENT:
Each avalanche deployment can push the material to
its limit and damage the AVABAG avalanche airbag.
That’s why a comprehensive general service is
essential after an avalanche deployment.
After an avalanche, your AVABAG system(P) and
backpack must be checked by the manufacturer. For
this you should take your AVABAG system to your
specialist dealer.
CUSTOMER SERVICE:
The AVABAG system (P) is designed for activations
with cartridge and practice activations without
cartridge.
Every system that has been activated often must be
subject to a complete check-up. A comprehensive
general service must be carried out not later than
years after the purchase date.
The service (subject to charge) includes an inspection
of the entire AVABAG avalanche airbag.
For this, take your AVABAG backpack with the AVABAG
system and AVABAG cartridge to an authorized
specialist AVABAG dealer.
STORAGE:
The AVABAG system must be stored in a dry place,
out of the reach of children, at room temperature
(approx.°C).
The AVABAG cartridge can remain attached to the
system for storage. However, its weight must be
checked before every use. For longer storage periods,
we recommend storing the cartridges separate from
the AVABAG system.
When separated from the AVABAG system, the AVABAG
cartridge must always have its protective cap in place
and be stored in its original packaging.
CLEANING:
Only water should be used for cleaning the AVABAG
system and the AVABAG backpack. Do not use solvents
or aggressive cleaning agents.
After being cleaned, the AVABAG system must be
completely dried at room temperature before being
reused, otherwise it is at risk of icing up.
MAINTENANCE, STORAGE, TRANSPORT
To Next Page
Loading...
Need help?
General
