Orwak 3110 - Safety Instructions; Safety Features Overview

8
2
Please read the operating instructions BEFORE operating the machine.
Our warranty/product responsibility requires that:
• instructions are followed, and that no conversion or modication is carried
out.
• original spare parts, and hydraulic oils and lubricants recommended by the
machine manufacturer are used.
• at least one annual service is carried out.
The user of the machine is responsible for the safety checks, and for ensuring that
daily maintenance of the machine is carried out. The user is responsible for seeing to
it that defects are rectied, and that neither the user nor other persons are exposed
to danger.
The owner is responsible for ensuring that all laws and instructions are complied with
when using the machine.
This symbol means WARNING or DANGER – personal safety instruc-
tion!
This machine is designed for ONE-MAN OPERATION.
Only the operator is allowed in the working area of the machine. The working
areaisdenedundertheheadingTechnical data; Recommended space for
machine in operation.
Themachinemustnotbeoperatedifthesafetyfeatures(e.g.breakersand
guards)havebeendeactivated,damagedorremoved.  
Lostordamagedpartsmustbereplacedwithoriginal spare parts.
Themachinemayonlybeoperatedbyapersonwhohasreceivedtraining
and has experience of the machine.
The machine has a high centre of gravity.Thepressplatemustbefully
loweredwhenthemachineismoved.Theareaimmediatelyaroundthe
machineanditsbaseshouldbecompletelylevel.
Installation,repairandservicingmustonlybeperformedbyqualied and
competentpersonnel,andinaccordancewiththeinstallationand
servicinginstructions.
The machine must notbeusedbyminors.
Neverclimbonthemachine!
When compacting plastic,themachinemustbesettoPlastic (lower press
force),see control panel.
Avoidcompactingmaterialsofdifferenthardnessinthemachineatthesame
time.(Ifthewastehasnotbeenproperlymixedanddistributedwellinthe
chamber,thiscanresultinanunevenloadonthepressplateanddamageto
the machine).
Useonlystrapsorstringrecommendedbythemachinemanufacturer.
SAFETY FEATURES
Themachineisequippedwiththefollowingsafetyeatures:abreakerswitchthatprevents
themachinefrombeingusedwhentheupperdoorisopen;mechanicaldoorinterlocks,
andguardsanddoorstoprotectagainstdangerousinterventioninthemachine.The
machineisalsoequippedwithanemergency stop. The above safety features must be
checked regularly; see section on weekly inspection and maintenance.
SAFETY
Safety................. 2
Control panel..... 3
Operating
instructions........ 4
Installation......... 5
Weekly
inspection and
maintenance..... 5
Technical
specications..... 6
Dimensional
drawing ............... 6
Transport........... 6
CE..................... 7
CONTENTS
English
Errors and omissions excepted.