To Next Page

To Previous Page

OFF

10A

Min 0,6 m

Box 58

576 22 Sävsjö

Sweden

Type Serial No

Product No

Date

Weight

Hz kW A

* *

***

English

INSTALLATION

NOTE!Duringinspectionandmaintenance,servicingandtheremovaloftrappedwaste

etc:

1.Settomanualmode(MAN)onthecontrolpanel.

2. Disconnectthepowertothemachinebyremovingtheplugfromthewallsocket.

3. Do not work inside the machine.

WEEKLY INSPECTION AND MAINTENANCE

SAFETY CHECKS

- Check the shutter switch:itmustnotbepossibletostartthemachineiftheuppershutterisopen/opened.

- Check that the emergency stop is working.

- Check that all covers and guards are intact.

- Check that there are no oil leaks on the machine.

-Checkthattheelectricalsupplycableisintactandproperlyprotectedagainstimpact.

Ifanyfaultsarediscoveredinthefunctionslistedabove,themachinemustnotbeuseduntilithasbeen

repairedbyauthorisedservicepersonnel.

Servicin and repairs must only be carried out by qualied and competent personnel, and in accordance with the

machine manufacturer’s instructions.

Theservicelightwillcomeonwhenthemachinerequiresservicing.Contactauthorisedservicepersonnel.

When changing the oil: Contact the local authorities for guidance regarding the environmentally correct dis-

posal of waste oil. Miscibilitymustbetakenintoaccountwhenchangingand/ortoppinguptheoil.Themachine

comeslledwithmineraloilfromthefactory.

TROUBLESHOOTING:

First, check:

OVERLOAD PROTECTION

NORMAL TRIPPED

FUSE

Orwak 3110 User Manual

Questions and Answers: