8
English
SAFETY
Read the operating instructions BEFORE operating the machine.
Our warranty/product responsibility requires that instructions are followed and
that original spare parts and recommended hydraulic oil and lubricants are used.
The user of the machine is responsible for the safety checks and for ensuring that
daily maintenance of the machine is carried out.
The user is responsible for ensuring that any faults are corrected and that neither the
user nor other individuals are exposed to danger.
The owner is responsible for ensuring that national and local laws are complied with
when using the machine.
This symbol means WARNING or DANGER - personal safety instruction!
This machine is designed for ONE MAN OPERATION.
Only the operator is allowed in the machine’s working area.
The machine must not be used if the safety functions (e.g. switches and pro-
tections) have been deactivated, damaged or removed.
Lost or damaged parts must be replaced with original spare parts.
The machine has a high centre of gravity. If the machine needs to be moved,
the press plate must be lowered fully before moving.
Installation, repair and service work may only be performed by qualifi ed and
competent staff, and in accordance with the installation and service instructions.
The machine must not be used by minors.
Never climb on the machine.
SAFETY FEATURES
The machine is equipped with the following safety features:
Upper and lower door switches, which prevent compacting with the doors open.
Covers and protections conceal hydraulic lines and movable machine parts. When
the lower door is opened, the lower door pressure is relieved. Baling is performed
from the side of the machine to keep the operator away from the baling area. The
machine is also equipped with an emergency stop, as well as a main switch that can
be locked to prevent unauthorised use, for example during service and maintenance
or when removing any waste that has become trapped. For the same reason, the
upper door can also be locked with a padlock in the top right corner.
RANGE OF APPLICATION
The machine is a hydraulically operated baler intended for compacting bulky materi-
als such as cardboard, paper and plastic. The material being compacted must be
evenly distributed in the chamber. The machine may only be used in areas that have
a roof, protection against wind and normal lighting.
Materials that are fl ammable or of an explosive nature, such as pressurised
containers or equivalent which, when exposed to pressure or sparks, could
cause damage, fi re or an explosion, must not be compacted in the machine.
Only use straps or string recommended by the machine manufacturer.
TABLE OF
CONTENTS
Safety ........................... 8
Operating instructions... 9
Technical specifi cations . 10
Dimensional drawing .... 10
Transport ...................... 10
Installation .................... 11
Weekly inspection
and maintenance .......... 12
CE................................. 13
2
3
4
4
4
5
6
7
2
To Next Page
Loading...
Need help?
General
