Orwak TOM 1040 User Manual

16
2x4
English
REQUIREMENTS FOR ANCHORING THE MACHINE
The machine should be securely anchored, to a oor or a wall, if there is a risk of it tipping
over. It should be anchored either with the anchoring devices supplied or in some other way
(depending on the oor and the environment).
Place a bag in the
bag holder.
The machine is preset at the factory in a basic mode with the frequency-based hatch opening and
frequency-based time interval for the press plate in the compaction position functions activated.
See the section Functions and operating modes for more information.
INSTALLATION AND PREPARATIONS FOR USE
NOTE! The machine has a high centre of gravity. This must be taken into account when the
machine is relocated. The machine must stand on a level oor surface.
Two people are required to remove the machine from the pallet. Wear safety shoes.
4

Orwak TOM 1040 Specifications

General

Brand	Orwak
Model	TOM 1040
Category	Trash Compactor
Language	English