22
?
TROUBLESHOOTING
If the machine ceases to function, or if the display has gone
out, rst check that the machine has power and that the fuse
for the building is intact. Wait for a while to ensure that the
overload protection has not tripped. Call an authorised serv-
ice technician if the fault persists.
ERROR MESSAGES
Error messages can be read (when the door is open) on the machine’s display. For optimal service as-
sistance – state the LED message (number of LEDs lit) when reporting the fault. Error messages can be
seen most clearly by looking under the cover, but without removing it.
English
10
To Next Page
Loading...
Need help?
General
