OSAKA – SMART BOX – Simple Manual – v1.1 – Page 11
12 – DIMENSIONS AND INSTALLATION_________________________________________________________________ _____
12.1 Dimensions_____________________________________________________________________________________ ____
The dimensions are expressed in mm (in).
12.2 Additional information for the installation___________________________________________________________ ____
Make sure that the device’s working conditions (temperature of operation, humidity of operation, etc.) are within the aforementioned
limits; consult the TECHNICAL DATA chapter of the extensive manual.
Do not install this device near heat sources (heaters, hot air conductors, etc.), devices with big magnets (speakers, etc.), in places
without direct light exposure, rain, dust, humidity, mechanical vibrations or pumps.
In compliance with the safety legislation, the protection against possible contacts with electric components must be ensured
through the correct installation of the device; all components that ensure protection must be fixed in such a way that they won’t be
able to be moved unless tools are used.
To Next Page
Loading...
