2
Safety
Safety precautions during use
• To ensure safe and correct use of the uPure 2, do not use the
uPure 2 without carefully reading this operation manual.
• To avoid shortening the lifespan or damaging the uPure 2, do
not use it with attachments or accessories not recommended by
OSIM. Use only original OSIM spare parts and accessories.
• Run the water for 30 seconds before using the uPure 2 for the
first time.
• Use only with water that meets drinking water standards.
• To keep the outlet clean, run the purified water for about 10
seconds before use everyday.
• If the uPure 2 has not been used for more than two days, run the
purified water for 60 seconds to keep the outlet clean.
• The function of the filter cartridge will deteriorate if it is not used
for more than 2 weeks. In this case, replace the cartridge.
• When the water is excessively turbid, switch to tap water shower
mode and let the water run for about 30 seconds before using it.
This will help to preserve the filter cartridge.
• The uPure 2 does not change the hardness of the water.
• In areas with high water pressure, turn on the water slightly or
reduce water volume while using to prevent damage or leakage
of the uPure 2.
• Do not use purified water for your aquarium.