Osmo VX7 - Logging In and Configuration; Accessing Configuration Interface; Changing Wi-Fi SSID and Password; Accessing Internet

You can view the label on the device to get the
default Wi-Fi SSID and password.
1. Log in to the 4G Mobile Hotspot Configuration page.
2. Select WiFi settings.
3. Change the Network Name (SSID) or password in main
SSID area.
4. Click apply.
Logging In
1. Ensure that the connection between your device and
the client device is active.
2. Launch the internet browser and enter
http://192.168.0.1 or http://ufi.ztedevice.com in the
address bar
3. Enter the password to log in to the 4G mobile hotspot
config page.
NOTE: The default password is admin.
Changing SSID
Accessing Internet
After a client device is successfully connected to your
device, you can access the Internet in Automatic or
Manual mode. The default mode is Automatic.