Osprey POCO AG PLUS - Assembly Instructions; Child Carrier Setup

To Next Page

To Previous Page

POCO AG™ SERIES

1. CHILD CARRIER SET-UP

1.1 Deploy the articulating footbar by

pulling the footbar back until an

audible click is heard.

1.2 Your Poco AG™ may arrive in the

stored position with the sidearms

connected at the bottom of the side

panel. To set up the carrier for use

release the red male buckle of the

sidearms from the lower grey

female buckles.

1.3 Rotate the sidearms up and insert

the red end of each sidearm into the

red cuff located on both sides of the

child’s head rest.

1.4 Once the sidearms are resting in the

cuffs, connect the red male buckle

of the sidearms to the red female

buckle of the cuffs. Your child carrier

cockpit is now locked into the child

carrying position.

To store and travel with your Poco AG

reverse Steps 1.1–1.4 and store in the Poco AG

Carry Case (sold separately).

ASSEMBLY

PLEASE SEE THE FOLLOWING PAGES FOR ASSEMBLY DIRECTIONS:

1. Child Carrier Set-up

2. Fit the Adult

3. Fit and Secure the Child

4. Safetly Put on the Child Carrier

Other manuals for Osprey POCO AG PLUS