POCO AG™ SERIES
9
FEATURE DETAILS
SUNSHADE
Included on all Poco AG™ models the built-in sunshade is easily stored and deployable
from its own zippered pocket. It offers quick and easy UV protection for the child.
1 Unzip the sunshade pocket marked
with woven label.
2 Grab the webbing loop on the top of the
sunshade and pull the sunshade out of the
pocket. Align the hook and loop at the base of
the sunshade with the hook and loop at the
top of the pocket. Press together to secure.
3 Securely grab the two red tabs and
pull them forward.
4 Insert the red tabs into the sleeves at
the front of the sidearms to secure and
tighten the sunshade. Your sunshade is
now installed.
TO STORE YOUR BUILT-IN SUNSHADE, FOLLOW THESE STEPS:
5 Place fingers in red webbing loops and pull red
tabs out of their sleeves. Ensure to the keep your
fingers hooked into the red loops to prevent the
sunshade from springing back at the child.
6 Separate the hook and loop at the base of the
sunshade. Slide the sunshade down into the
storage pocket and zip the storage pocket
shut.
To Next Page
Loading...
