POCO AG™ SERIES
8
4.1 a Ensure the adult torso and hipbelt are properly fitted on the adult.
(Refer to Step 2)
b Ensure the child is properly fitted and secure within the child carrier.
(Refer to Step 3)
c Loosen one side of the harness - keeping the side you intend to put on your shoulder
first tight and fitted.
d Unbuckle and loosen the adult hipbelt and adult sternum strap.
4.4 Slip your free arm through the
harness strap that is tight and fitted.
Grab the shoulder strap and lift the
carrier up onto one shoulder.
4.5 While you’re still holding the shoulder
strap, lean forward to stabilize the
weight of the child and carrier on
your back. Let go of the other handle
in front of the cockpit. Slip this free
arm through the shoulder harness
and slide the carrier up onto
both shoulders.
4.9 Buckle and tighten the sternum strap. You are now ready to use your
Poco AG™ child carrier.
Additional Recommendation- Reach back and collapse footbar. This will allow a greater
maneuverability around objects. It is very important you ensure the footbar is deployed
and you hear the audible click before taking off the child carrier.
To take off the child carrier, ensure the footbar is deployed and you hear the audible
click. Then reverse steps 4.1–4.9.
4.6 Buckle and tighten the hipbelt.
4.7 Tighten the shoulder harness straps.
4.2 Facing the adult backpanel and
using both handles at the front and
rear of the child cockpit, lift the child
carrier and place the frame onto
your slightly bent knee while in a
standing position.
4.3 Let go of the handle behind the
child’s head rest, and with your
free hand ensure the hipbelt is
spread open.
4.8 Tighten the load lifter straps.
PREPARE THE CHILD COCKPIT BEFORE PLACING THE CHILD IN THE CARRIER To adjust the seat, follow these steps:ADJUST CHILD SEAT HEIGHT
SECURE THE CHILD
ASSEMBLY
4. SAFELY PUT ON THE CHILD CARRIER
To Next Page
Loading...
