8
3. Safety
4. Requirements
3.1 Warning
To avoid safety hazards, obey the following:
• Do not look directly into the backlight.
• Turn the backlight o when the system is not in use.
3.2 Caution
• Only use the device for the purposes intended (described in this document).
• Take care when handling syringes to avoid touching the needle.
• If using within a shared workspace, position the backlight to point away from others.
• Take care to avoid trapping ngers while adjusting the tilt stage position.
Table 4.1.Contact Angle Goniometer and Contact Angle software requirements
Table 4.1 details the power requirements for the system, and the minimum computer specications for the
Ossila Contact Angle software.
Power 12 V / 1 A DC (supplied with the system)
Operating Systems Windows Vista, 7, 8, or 10
CPU Dual Core 2 GHz
RAM 2 GB
Available Hard Drive Space 250 MB
Monitor Resolution 1920 x 1080 pixels
Connectivity
USB 2.0 or newer. A USB-A to USB-B cable is supplied with system.
NOTE: USB connection does not supply power to the backlight.